It is great to have a pool in the backyard of your house where you can host parties, adopt an exercise routine and spend the afternoons. However, with a pool comes the responsibility for its maintenance. If you can’t stick to a maintenance schedule, your pool can have different types of problems, such as algae build-up, broken filters, and green water, to name a few. Below are some pool maintenance tips that you may want to consider.
1. Skim and scrub
First of all, make a habit of removing debris and leaves from the surface of the water. Ideally, you may want to do it on a daily basis. Also, if you can afford to spend a little money, you can invest in a good robot vacuum cleaner to remove the unwanted stuff from the bottom as well.
Aside from skimming, be sure to clean the sides to avoid algae build-up. You don’t have to do it every day. Generally, you can do it once a week. You can use a scrubber to get rid of the algae.
2. The filter
The job of your kidneys is to help your body get rid of impurities. In the same way, your pool filter removes different types of impurities, such as small toys, leaves and dirt, just to name a few.
In general, you can clean the pool by removing the filter cover. But it is better to clean the filter basket at least once every 7 days. It is also necessary to clean the pipes of the filter system. All you need to do is clean the leaf basket.
3. Chemical levels
Regarding the maintenance of the pool, it is very important to take care of the chemical levels. If the pool water is not balanced correctly, it will appear cloudy. Also, it will irritate the eyes and skin. Over time, bacteria will multiply in the pool, which you may not want to happen.
It is a good idea to test your pool water at least once a week. Ideally, you should consider 6 chemical levels, namely acidity / alkalinity, free chlorine, calcium hardness, total alkalinity, and cyanuric acid.
You can test the water without any problem. All you need to do is buy a couple of test kits from your nearby pool store.
Once the chemicals are balanced, your pool water will be clean and odorless.
4. Cost of chemicals
It is true that the price of swimming pool chemicals is high. According to most pool stores, you can make use of baking soda to have a check on the alkalinity of the water. And this can be done without affecting PH levels.
You can get the job done using baking soda for a small amount of money. Actually, baking soda is included in most baking soda products.
Therefore, if you are going to clean your pool, be sure to follow the advice given in this short article.